Datacom Systems DS-1404 Скачать руководство пользователя страница 41

Страница: 41 / 55

Datacom Systems Inc. 2016

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

6.3.2

Management Reset

Usage

Guidelines

This command is used to resend the DHCP Discovery manually.

Syntax

MANAGEMENT RESET

Example

MANAGEMENT RESET

6.3.1

Management Set CLI Timeout

Usage

Guidelines

This command is used to set the telnet command line timeout. If there is no
activity from a Telnet login from within the time specific by this command, they
will be disconnected.

Syntax

MANAGEMENT SET CLI TIMEOUT <1-1000>

Example

MANAGEMENT SET CLI TIMEOUT 100

Command

Notes



The number component of the command determines the timeout in
minutes.



Only enter positive values into the timeout field.

6.3.2

Management Set Daemon CLI

Usage

Guidelines

This command is used to set the telnet command line on or off.

Syntax

MANAGEMENT SET DAEMON CLI <ON/OFF>

Example

MANAGEMENT SET DAEMON CLI ON

Command

Notes



If turned off, connections through Telnet will not be accepted by the
DURAstream.

6.3.3

Management Set Daemon Shell

Usage

Guidelines

This command is used to set the ability for remote login to recovery.

Syntax

MANAGEMENT SET DAEMON SHELL <ON/OFF>

Example

MANAGEMENT SET DAEMON SHELL ON

Содержание DS-1404
























































Результаты поиска

Содержание DS-1404

Отзывы:

Datacom Systems DS-1404, Быстрый старт, Страница: 41 / 55

Результаты поиска

Содержание DS-1404

Отзывы: