Datacom Systems DS-1404 Скачать руководство пользователя страница 40

Страница: 40 / 55

Datacom Systems Inc. 2016

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

6.2.7

Email Set Trigger

Usage

Guidelines

Use this command to decide when to send out an email notification. Email
Notifications can be sent out based on link state changes, heartbeats
lost/arrived, Failover Status Change, Power Supply Status Change, and During a
Warm/Cold Boot.

Syntax

EMAIL SET TRIGGER <Feature> (ON/OFF)

Example

EMAIL SET TRIGGER Heartbeat ON

Command

Notes

Feature Triggers Available:



Link



Heartbeat



Failover



Power



Boot



6.3 Management Port Commands

6.3.1

Management Get Info

Usage

Guidelines

This command is used to print current IP information for the management port,
in addition to system information.

Syntax

MANAGEMENT GET INFO

Example

MANAGEMENT GET INFO

Command

Notes

Displays:



DHCP/Static mode



IP, Subnet, Gateway



DNS Server IP



TFTP Server IP



MAC Address



System Name, Serial Number, Firmware Version.



Telnet State



NTP State



Command Line Timeout

Содержание DS-1404
























































Результаты поиска

Содержание DS-1404

Отзывы:

Datacom Systems DS-1404, Быстрый старт, Страница: 40 / 55

Результаты поиска

Содержание DS-1404

Отзывы: