Datacolor AHIBA IR, Руководство пользователя

Страница: 12 / 52

6
•
Ahiba IR Ahiba IR User's Guide
INFORMATION. Indicates there is additional
information relevant to the topic..
The precautions below should always be considered during the unit assembly,
operation and maintenance.
General Precautions
•
The equipment shall only be operated as instructed in this guide. If
equipment is used in a manner other than that specified in this
document, the protection provided by this instrument may be impaired.
•
Read this user’s guide carefully before placing the unit in service.
•
This unit weighs 73kg. Any movement or relocation of the unit requires
a minimum of four persons.
Electrical/Environmental Precautions
•
To prevent an electrical shock or fire, be sure to use the power cord
supplied by Datacolor.
•
The power cord must be plugged into an outlet with a protective
grounding terminal. Do not invalidate protection by using an extension
cord without protective grounding.
CAUTION
Turn main power switch to OFF and remove the power cord from the
electrical outlet before any internal service work is done.
Use Precautions
•
Unit is to be used only as laboratory dyeing equipment.
•
Continue operating only as long as the unit functions properly.
•
Units equipped with a 5L drum should limit the heating gradient input to
2.5°C/min, this due to the mass of the beaker and to prevent
“Temperature out of Range” errors.
•
Certain internal parts may reach a temperature greater than
50°C/122°F. Unit can only be operated when the door is closed.
CAUTION
When door is opened, internal parts should only be handled after the
unit has
cooled to 50° C.