DataCard SD260L, Инструкция по установке и руководство администратора, Страница: 109 / 130

SD260L/SD360/SD460 Installation and Administrator’s Guide 97
Card Storage
These guidelines apply to both printed and unprinted cards.

Cards must be stacked so that they do not shift and rub against each other.

When you store cards, make sure that no two cards contain images or blocks of color that
come in contact with each other.

Make sure that the magnetic stripe on one card does not come in contact with the magnetic
stripe on another card.

Make sure that cards with magnetic stripes are stored away from magnets and other
magnetic objects.

Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on
exposed edges.

Keep cards in their original packaging.

Cards must be at room temperature when they are used. If cards are stored in a cooler
environment than the printer, allow them to reach room temperature before you use them.
Cleaning Supplies
The print ribbon kit includes a cleaning card and a replaceable cleaning sleeve. For best results,
keep additional cleaning supplies on hand.
The following additional cleaning supplies are available:
Supply Description
Printer cleaning cards Pack of 10 double-sided, isopropanol-coated cleaning cards
used to clean the printer card track and transport rollers.
Cleaning sleeves Pack of 5 replaceable, adhesive-coated cleaning sleeves.
Cleaning swabs Pack of 5 isopropanol-saturated cleaning swabs for cleaning
debris and dust from the printhead and from hard-to-reach
internal areas of the printer.
Laminator cleaning cards Pack of 10 double-sided, sticky cleaning cards used to clean
the laminator when a holographic overlay is installed.