DataCard CR825, Инструкция по установке и руководство администратора

Страница: 102 / 140

86 Printer Manager
Using custom magnetic stripe data formats is a two-step process. First, define the custom tracks
using MagStripeCustomTrack1, MagStripeCustomTrack2, and MagStripeCustomTrack3. Second,
apply the custom track using the settings on the MagStripeGeneral menu.
1.
To use the defined custom track:
a.
Open the MagStripeGeneral menu.
b.
Select Custom for DataFormat1, DataFormat2, or DataFormat3 to use the custom track.

MagStripeCustomTrack1 corresponds to DataFormat1

MagStripeCustomTrack2 corresponds to DataFormat2

MagStripeCustomTrack3 corresponds to DataFormat3
2.
Click Set Current to apply the changes.
Emboss
The Emboss settings let you specify values when using an embossing system.
1.
Enter a value (within the allowable range) in the Current Value column.

RegistrationXDist—The distance at which the card is registered at home inside of the
embosser. Select from -100 to 100 motor steps.

TopperDwell—The length of time (dwell) in which the topping module applies topping
foil to the embossed characters. Select from 100 to 2000 milliseconds.

TopperTemperature—The temperature, in degrees Celsius, at which the topping module
applies topping foil to the embossed characters. Select from 0 to 127 degrees C.
2.
Click Set Current to apply the changes.
The Emboss setting displays in the Printer Setting menu only for a CE875 instant
issuance system.
Description Default Value
Current Value
(unit)
Allowed Range
1) RegistrationXDist 0 0 [-100 – 100]
2) TopperDwell 850 850 [100 – 2000]
3) TopperTemperature 121 121 [0 – 127]