DataCard CR805, Руководство пользователя

Страница: 103 / 136

CR805 Retransfer Card Printer User’s Guide 87
108: Magstripe read no data
The printer did not find any magnetic stripe data on the card. The card will be canceled.
1.
Make sure that you are using magnetic stripe cards that match the printer settings.
2.
Make sure that the cards are placed in the printer correctly.
Press the U
SER
button on the printer to clear the message. On the PC, click OK to clear the
message.
H
INTS
& T
IPS

The card might have been turned the wrong way. A diagram inside the input hopper shows
the correct orientation.

The card might not have a magnetic stripe.
111: Card not picked
The printer did not pick a card. To complete the current card:
For printers with an input hopper, open the input hopper, add or reposition cards, and close the
hopper.
For printers with single card feed, push the card in until the printer picks it.
Press the U
SER
button on the printer to clear the message. On the PC, click Retry, or click Cancel to
cancel the card.
112: Card hopper empty
The printer did not detect cards in the input hopper.
Add cards to the input hopper.
Press the U
SER
button on the printer to clear the message. On the PC, click Retry, or click Cancel to
cancel the card.