![background image](http://html.mh-extra.com/html/datacard/cp60/cp60_service-manual_511431069.webp)
CP60 and CP60 Plus Service Manual
4-11
Card Jams in Printing Area
Symptom Comments
Card stops prior to reaching the
platen roller.
•
Clean the printer.
•
Increase the card registration distance.
•
Check the front rocker assembly springs for damage.
•
Check the front card guide and spring for damage.
•
Check the position of the sensors and make sure they are
firmly inserted into the printer.
Card stops under the printhead.
•
Two cards were picked and one is in the back of the
transport.
•
If using a monochrome ribbon, make sure an CP Series print
ribbon is installed. Other ribbons are not designed for the
increase in printhead heat.
•
Inspect the card for improper print ribbon panel
placement. Printing with the wrong panel can cause the
ribbon to adhere to the card.
•
Decrease the printing brightness setting.
•
Inspect the card guide and rocker assembly springs for
placement and damage.
Card stops past the printhead.
•
Inspect the rear rocker arm assembly and springs for
placement and damage.
•
Inspect the magnetic stripe rocker arm and springs for
placement and damage.
•
Make sure the magnetic stripe head is firmly seated.
•
Inspect the rear card guide and spring for damage.
Содержание CP60
