DataCard CE875, Инструкция по установке и руководство администратора

Страница: 117 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 101
Card Storage
These guidelines apply to both blank card stock and processed cards.

Use cards that are at room temperature. If cards are stored in a cooler environment than the
printer, allow them to reach room temperature before using them.

Stack cards so that they will not shift and rub against each other.

Make sure that the magnetic stripe on one card does not come in contact with the magnetic
stripe on another card.

Make sure that cards with magnetic stripes are stored away from magnetic objects.

Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on
exposed edges.

Store cards in their original packaging.
Cleaning Supplies
For best results, keep additional cleaning supplies on hand.
The following cleaning supplies are available:
Supply Part No. Description
Cleaning cards 558436-002 Pack of 10 double-sided, adhesive-coated
cleaning cards used to clean the printer
card track and transport rollers.
Cleaning sleeves 569946-001 Pack of 5 adhesive-coated cleaning
sleeves.
Cleaning swabs 507377-001 Pack of 5 isopropanol-saturated cleaning
swabs for cleaning debris and dust from
the printhead and from hard-to-reach
internal areas of the printer.
Foam fan filter 514267-001 Replacement filter for the rear door fan.
Change the filter at least once a year.
Card Inspection Gloves 510034-001 Pack of 100, powder-free, with no natural
rubber latex.