DataCard CE870, Руководство пользователя

Страница: 89 / 92

CE870 Instant Issuance System User’s Guide 77
130: Embosser card entry jam
The card path is blocked in the embosser.
1.
Open the embosser and remove the supply cartridges.
2.
Remove any cards found.
3.
Replace the cartridges, and then close and lock the embosser.
H
INTS
& T
IPS
Refer to “Embosser Card Jam” on page 61 for more information.
131: Embosser card exit jam
The card path is blocked in the embosser.
1.
Open the embosser and remove the supply cartridges.
2.
Remove any cards found.
3.
Replace the cartridges, and then close and lock the embosser.
H
INTS
& T
IPS
Refer to “Embosser Card Jam” on page 61 for more information.
132: Embosser card stack full
The embosser output hopper is full or blocked.
Remove cards from the printer output hopper.
133: Embosser card reject full
The embosser reject tray is full.
1.
Open the embosser and empty the reject tray.
2.
Close and lock the embosser.
H
INTS
& T
IPS
The embosser reject tray holds five cards. Empty it regularly to avoid receiving the message. Refer
to
“Empty the Embosser Reject Tray” on page 50 .