DataCard CE870, Руководство пользователя

Страница: 45 / 92

CE870 Instant Issuance System User’s Guide 33
Load Supplies
Embossing supplies include topping foil and indent ribbon. The topping foil is applied to the
embossed characters and can be applied to up to five lines of characters. The indent ribbon is
used to apply black or white color to a single line of indented characters. The printer supplies
include a cleaning sleeve and an optional print ribbon.
If the embosser supplies are preloaded into their cartridges, install the cartridges into the
embosser component.
Load the Indent Ribbon Cartridge
1.
Prepare the indent ribbon cartridge and
indent roll.
a.
Unlock and open the embosser supplies
access door and remove the indent
ribbon cartridge from the embosser.
The indent ribbon cartridge is on the
right as you face the embosser
opening.
b.
Place the indent ribbon cartridge on a
flat surface with the spindles facing up.
c.
Remove the used indent ribbon spools
from the cartridge and discard them
according to your site’s security
procedures.
d.
Remove the new indent roll from its package.
IMPORTANT! Do not separate the silver take-up spool away from the blue supply spool.
2.
Secure the blue supply spool into the
spindle.
a.
Match the keyed pattern of the supply
spool hub with the left side spindle.
b.
Push the supply spool into the spindle
until it clicks securely into place.
The topping foil and indent ribbon cartridges are not interchangeable. They fit only
into the designated cartridge area.
IMPORTANT! Do not separate.
Supply Spool
Take-up
Spool