DataCard CE870, Инструкция по установке и руководство администратора

Страница: 15 / 130

CE870 Instant Issuance System Installation and Administrator’s Guide 3
Site Requirements
Set up and use the system in an environment that meets the following requirements.

Use single phase, 3-wire, grounded receptacles.

Place the system in a location that provides the following:

A sturdy, level surface. Avoid unstable locations.

A surface that is no taller than 27 inches (68.5 cm) in height to allow easy user access and
viewing of components. Refer to
“System Dimensions” on page 4 for more information.

Enough space to open all system access doors and to access power cords and data cables.
Refer to
“Clearance Requirements” on page 5 .

Enough space around the printer to allow for ventilation.

Select a location in an environment with temperatures ranging from 60° to 95°F (15° to 35°C).

Keep the system and its supplies away from direct sunlight.

Do not place the system near heating ducts, fans, or other air vents.

Place the system and its supplies in a clean office environment, keeping paper and foreign
materials off the equipment.

Keep all dust, dirt, food, and liquids away from the system.

Do not use the system for purposes other than the intended use.