4 Using the control module
Clarity Controls
4.1 Method Setup - Acquisition
The
Method Setup - Acquisition
tab serves for setting the common
parameters of the
Shodex RI-101
detector. If more than one detector is
available, it is possible to select between them by using the
Select
Detector
combobox on the top of the dialog.
Fig 5: Method Setup - Acquisition
Sampling Period [s]
Defines the frequency of data being gathered in the detector. The
frequency of the data being sent to
Clarity
from the detector is defined by
Response Time
parameter. Valid values for the
Shodex RI-101
detector
range from
0.1
to
2.0
s.
Range for Integrator Output [µRIU/V]
Sets the output range for the Integrator Output analog output, as well as
digital signal sent to
Clarity
. The available range is dependent on the
Detector Model
as set in the
DataApex UNI Setup
dialog.
Range for Recorder Output [µRIU/FS]
Sets the output range for the Recorder Output analog output, as well as
digital signal sent to
Clarity
.
Polarity of the Output Signals
Determines the polarity of the output signal.
Balance of the Output Signals [mV]
Defines the value to which the signal level will be reset when
Autozero
function is used.
- 7 -
