INT7 A/D Converter
4 Using the INT7 Card
necessary time lags at the start of the acquisition are significant. When
measuring multi-detector chromatograms it will minimize the time shift
between detector signals and thus improve the detection of peaks.
Note:
Synchronize Start with Digital Input
reflects the settings of the
Contact
Closure
/
Opening
of the
External Start/Stop
option in the
dialog.
Caution:
Turn this function
ON
only in case one of the digital inputs of the
configured
INT7
is also set in the
Ext. Start Dig. Input
option in the
dialog.
Device Setup
This section allows to modify the naming of digital inputs and outputs and
change the Mains Supply Frequency Suppression settings.
Digital Input Names
Allows to change the names of digital inputs.
Fig 11: Digital Input Names
Digital Output Names
Allows to change the names of digital outputs. These names will be used
in the
dialog in the chapter
Fig 12: Digital Output Names
- 14 -
