Data Video PD-6, Инструкция по эксплуатации

Страница: 10 / 12

9
Specification
AC Input
Voltage Range 100~240 VAC
AC frequency 50Hz or 60Hz
Fuse Rating 6.3A/250VAC
Efficiency (Typ.) UP TO 80%
DC Output
DC Voltage 12V
、
14.4V
、
24V
、
48V
Voltage Tolerance ±3%
Rated Power(Max) 4 channels for 30W ; 4 channels for 60W
Protection
DC Overload
105%~150% rated output power
Protection type: Recovery automatically after fault condition is
removed
AC Overload non-recovery fuse on the AC input outlet
Connector
On/Off Switch
Powers the PD-6 On / Off
Light switch indicator
AC In outlet
with built-in fuse
AC Inlet for connecting to suitable mains power outlet – 100-
240VAC. The socket contains a fuse holder fitted with a 6.3A
/250V fuse.
4PIN XLR Female
8 Groups DC OUTPUT
：
(PIN1:GND , PIN2:VCC, PIN3/4:NC)
Slide Switch
8 Groups Switch
：
There are four options for each group
：
12V
、
14.4V
、
24V
、
48V DC output
Environment
Working Temp 0°C to 40°C (32°F to 102°F)
Working Humidity 10% to 90% (non condensing)
Storage
Temp. Humidity
-40°C to +85°C, 10~95% RH
Others
Cooling Fan
Has four built-in cooling fans, please ensure that these are not
blocked, and that some airflow is available.
N.B. Internal ambient temperature of about 50
℃
fan starts.
(2 fans at middle and 1 fan at rightmost)
N.B. Internal ambient temperature of about 70
℃
fan starts.
(1 fan closes to the Ground terminal)
DC Output LED
Indicator
LED Color Indicator
Red:48V / light Red:24V / Green:14.4V / Blue:12V
Dimension 440 mm x 235 mm x 46 mm (L x W x H)
Weight Approx. 5.2 kg/ 11.5 lbs
Ground Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a cross-sectional area of at least 1.0 mm 2 .