Data Translation DT9835, Руководство по началу работы, Страница: 59 / 62

Verifying the Operation of a Function Module
51
7
7
7
7
7
7
7
7
7
Performing a Single-Value Digital Input Operation
To verify that the module can read a single digital input value,
perform the following steps:
1. Connect a digital input to digital input line 0 of bank 0 on the
DT9835 module. Refer to
page 42 for more information on
connecting digital inputs.
2. Click the Acquisition menu.
3. Click Digital Input.
4. Select the appropriate DT9835 module from the Board list box.
5. Select digital input port 0 by clicking Port A.
6. Click Get.
The value of each digital input line of bank 0 is displayed on the screen
in both text and graphical form.
Performing a Single-Value Digital Output Operation
To verify that the board can output a single digital output value,
perform the following steps:
1. Connect a digital output to digital output line 0 of bank 1 on the
DT9835 module. Refer to
page 43 for an example of how to
connect a digital output.
2. Click the Control menu.
3. Click Digital Output.
4. Select the appropriate DT9835 module from the Board list box.
5. Select digital output bank 1 by clicking Port B.