manualshive.com logo in svg

Data Translation DT9834 Series, Руководство пользователя

Поделиться
Скачать
Data Translation DT9834 Series Скачать руководство пользователя страница 19

Overview

19

Supported Software

The following software is available for use with the DT9834 Series modules and is on the Data 
Acquisition OMNI CD: 

•

DT9834 Series Device Driver 

– The device driver allows you to use a DT9834 Series 

module with any of the supported software packages or utilities. 

•

Quick DataAcq application

 –

 

The Quick DataAcq application provides a quick way to 

get up and running using a DT9834 Series module. Using this application, you can verify 
key features of the modules, display data on the screen, and save data to disk. 

•

The quickDAQ application –

 An evaluation version of this .NET application is included 

on the Data Acquisition OMNI CD. quickDAQ lets you acquire analog data from all 
devices supported by DT-Open Layers for .NET software at high speed, plot it during 
acquisition, analyze it, and/or save it to disk for later analysis. 

•

Measure Foundry

 

–

 

An evaluation version of this software is included or provided via a 

link on the Data Acquisition OMNI CD. Measure Foundry is a drag-and-drop test and 
measurement application builder designed to give you top performance with ease-of-use 
development. Order the full development version of this software package to develop 
your own application using real hardware. 

• DT-Open Layers for .NET Class Library

 – 

Use this class library if you want to use Visual 

C# or Visual Basic for .NET to develop your own application software for a DT9834 Series 
module using Visual Studio 2003 or Visual Studio 2005; the class library complies with the 
DT-Open Layers standard.

•

DataAcq SDK

 

–

 

Use the Data Acq SDK if you want to use Visual Studio 6.0 and Microsoft 

C or C++ to develop your own application software for a DT9834 Series module using 
Windows XP, Windows Vista, or Windows 7; the DataAcq SDK complies with the 
DT-Open Layers standard.

•

DTx-EZ

 

–

 

DTx-EZ provides ActiveX controls, which allow you to access the capabilities of 

the DT9834 Series modules using Microsoft Visual Basic or Visual C++; DTx-EZ complies 
with the DT-Open Layers

 

standard.

•

DAQ Adaptor for MATLAB

 – Data Translation’s DAQ Adaptor provides an interface 

between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data 
Translation’s DT-Open Layers architecture. 

•

LV-Link

 

–

 

An evaluation version of this software is included on the Data Acquisition 

OMNI CD. Use LV-Link if you want to use the LabVIEW graphical programming 
language to access the capabilities of the DT9834 Series modules.

Refer to the Data Translation web site (www.datatranslation.com) for information about 
selecting the right software package for your needs.

Содержание DT9834 Series



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды