Data Translation DT9828 Скачать руководство пользователя страница 29

Страница: 29 / 116

Installing a Module

Configuring the Device Driver

Note:

In Windows 7, Windows 8, and Vista, you must have administrator privileges to run

the Open Layers Control Panel. When you double-click the Open Layers Control Panel icon,
you may see the Program Compatibility Assistant. If you do, select

Open the control panel

using recommended settings

. You may also see a Windows message asking you if you want

to run the Open Layers Control Panel as a "legacy CPL elevated." If you get this message,
click

Yes

If you do not get this message and have trouble making changes in the Open Layers Control
Panel, right click the DTOLCPL.CPL file and select

Run as administrator

. By default, this file

is installed in the following location:

Windows 7, Windows 8, and Vista (32-bit)
C:\Windows\System32\Dtolcpl.cpl

Windows 7, Windows 8, and Vista (64-bit)
C:\Windows\SysWOW64\Dtolcpl.cpl

To configure the DT9828 Device Driver, do the following:

If you have not already done so, power up the host computer and all peripherals.

From the Windows Control Panel, double-click the

Open Layers Control Panel

icon.

The Data Acquisition Control Panel dialog box appears.

Click the DT9828 module that you want to configure.

If you want to rename the module, click

Edit Name

Enter a new name for the module, and then click

Note:

This name is used to identify the module in all subsequent applications.

When you are finished configuring the module, click

Close

Repeat steps 3 to 6 for the other modules that you want to configure.

Close the Control Panel.

Содержание DT9828





















































































































Результаты поиска

Содержание DT9828

Отзывы:

Бренды по названию

Популярные бренды

Data Translation DT9828, Руководство пользователя

Результаты поиска

Содержание DT9828

Отзывы:

Бренды по названию

Популярные бренды