Data Translation DT3130 Series, Руководство по началу работы

Страница: 6 / 54

About this Manual
vi
• Chapter 5 , “Verifying Board Operation,” describes how to verify
the board’s operation using DT Acquire.
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold .
•
Courier font
is used to represent source code.
Related Information
Refer to the following documents for more information on using an
DT3130 Series board:
• The DT3130 Series User’s Manual (UM-17314), included on the
Imaging OMNI CD

provided with the DT3130 Series boards,
describes the features of the DT3130 Series boards and DT3130
Series Device Driver.
• Frame Grabber SDK User’s Manual (UM-15943) and the Frame
Grabber SDK online help, included on the Imaging OMNI CD
provided with the DT3130 Series boards, describe the Dynamic
Linkable Library (DLL) that you can use to write image
acquisition application software.
• DT-Active Open Layers User’s Manual (UM-17325), available from
Data Translation, describes DT-Active Open Layers

, an ActiveX
control, which allows you to use Data Translation PCI frame