Data Translation DT3130 Series, Руководство по началу работы

Страница: 21 / 54

Preparing to Use the DT3130 Series
13
2
2
2
2
2
2
2
2
2
Viewing the DT3130 Series
Documentation
Note:
To view the DT3130 Series documentation, ensure that
Adobe Acrobat 4.0 or greater is installed on your system. Acrobat
Reader 5.0 is provided on the Imaging OMNI CD. If you install
Acrobat Reader 5.0 from this CD, you must open Acrobat Reader
and accept the license agreement before you can view the
documentation.
Once you have installed the manuals to your hard disk, you can view
these documents by accessing them through the Data Translation,
Inc\DT3130 Series program folder.
You can also view the documents from the Imaging OMNI CD, by
performing the following steps:
1. Insert the Imaging OMNI CD into your CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3.
In the
Command Line
edit box, enter
x:\LAUNCH.EXE
(where x
is the letter of your CD-ROM drive) .
4. Click OK .
The Imaging OMNI CD splash screen appears.
5. Click View Documentation
6. Click Getting Started Manuals and click DT3130 Series , or click
User’s Manuals
and click
DT3130 Series
.
Adobe Acrobat Reader opens.