Data Harvest EASYSENSE Vu+ Скачать руководство пользователя страница 16

Страница: 16 / 28

EASY

SENSE Vu+ Reference Manual DO255 (3)



Data Harvest Group Ltd.

System

1. While in the main menu use the up or down buttons

▲▼

to scroll until the cursor is pointing at

System

. Press the enter button

►

to select.

2. Use the up and down buttons

▲▼

to scroll the menu until the cursor is pointing to the appropriate

system menu option. Press the enter

►

button to select.

Switch Off

Used to send Vu+

directly into low power (sleep mode), even when it’s connected to a USB port.

Press any button to ‘wake up’ the logger.

Note

: While operating on battery power Vu+ automatically goes to low power (sleep) after a period of inactivity.

Sensor (changing range or turning on or off)

Note:

These options are also available by pressing enter

►

whilst in Meter mode.

Some built-in and plug in sensors have multiple ranges and the built-in sensors can be switched On or
Off the display e.g. Sound and Temperature switched off so only Light measurements are displayed.



Use the up or down buttons (

▲▼

) to move the cursor until it is

pointing at the appropriate sensor and press enter

►



Use the

▲▼

buttons to move the cursor until it points at the

appropriate option (either Set range or Turn On or Off) and press
enter

►

Note:

If a sensor only has one range then only Turn Off will be available.

Set range

The cursor will indicate the current range selected.

Use the up or down buttons (

▲▼

) to scroll the list until the cursor is

pointing at the required range. Press enter

►

to select the range.

Press the stop button



to return to the sensor window.

Turning a built-in

sensor ON or OFF the display

With the cursor pointing at Turn Off or On press enter

►



Press the stop button



to return to Meters.

▼
►

Switch Off

Sensor
Delete Data

Use the scroll buttons to go up or
down the list of options

Review

Bluetooth

►System

▲

Full Reset
Language
Date Style

Decimals
Logger Name
About

Use enter to select an option

▼
3)Sound
►4)Light
5)Temperature
▲

▼
Internal Light
►0-1k lx
0-10k lx

▼
Light
►Set range
Turn Off

Light
Set range
►Turn Off

▲

Содержание EASYSENSE Vu+





























Результаты поиска

Содержание EASYSENSE Vu+

Отзывы:

Бренды по названию

Популярные бренды

Data Harvest EASYSENSE Vu+, Справочное руководство

Результаты поиска

Содержание EASYSENSE Vu+

Отзывы:

Бренды по названию

Популярные бренды