Data Harvest EASYSENSE V-Log, Справочное руководство

Страница: 18 / 31

EASY SENSE V-Log Reference Manual DO248 (5)
18

Data Harvest Group Ltd, 2014
Sensor (changing range or turning on or off)
Note: This option is also available by pressing enter
►
whilst in Meter mode.
Set range
Some built-in and plug in sensors have multiple ranges, to alter the
selected range:

Use the up or down buttons
▲▼
to move the cursor until it is
pointing at the appropriate sensor and press enter
►
.

Use the
▲▼
buttons to move the cursor until it points at Set
Range and press enter
►
.
Note: If a sensor only has one range then only Turn Off will be available.
The cursor will indicate the current range selected. Use the up or
down buttons (
▲▼
) to scroll the list until the cursor is pointing at
the required range. Press enter
►
to select.

Press stop

twice to return to the System menu.
Turning a built-in sensor ON or OFF the display
Built-in sensors can be switched On or Off the display e.g. Sound, Pressure
and Humidity switched off so only Light measurements are displayed.

Use the up or down buttons
▲▼
to move the cursor until it is
pointing at the appropriate sensor and press enter
►
.

Use the
▲▼
buttons to move the cursor until it points at Turn Off or
Turn On and press enter
►
.

Press stop

to return to the System menu.
Notes:

If you change a sensor’s range or turn it on/off via the logger while connected to a computer, it
may be necessary to select New in the software for these changes to be detected.

If a Full Reset is performed it will automatically return all sensors to their default state.
Delete Data
Select whether to delete all or individual data sets.

Delete all
– press ►
to confirm your decision or stop

to cancel.

Choose data - use the up or down buttons
▲▼
to scroll through the
data sets and when you find the data press enter
►
to delete).
Full Reset
Please note: A full reset will erase all data sets!
A hard reset (see page 21) can be tried first if V-Log
simply stops responding, a hard reset won’t alter
settings or erase data.
A full reset will:
o
Erase all stored data sets.
o
Automatically return any built-in sensors to their factory default setting (Sound On with dBA
range, Light On with 1 kLux Slow range, Pressure On with kPa range, Humidity On).
o
Return the date format to DD-MM-YY.
o
Return decimals to On with a full stop format.
o
Return language to its default.
o
Any WiFi settings will not be altered (see page 28 for resetting WiFi setting).
▼
5)Sound
►
6)Light
7)Pressure
▲
▼
Light
►
Set range
Turn Off
▼
Sound
Set range
►
Turn Off
▼
►
5)Sound
6)Light
7)Pressure
▲
▼
►
Choose Data
Delete All
▼
Light
►
1k (Slow) lx
1k (Fast) lx