Data Harvest EASYSENSE Q3+, Руководство пользователя, Страница: 29 / 40

EASY
SENSE Q3+ and Q5+ DO185 (2)
Updating EASYSENSE Q’s Firmware
Occasionally Data Harvest may release updated firmware which will contain
improvements or new features. Updates will be made available from the
Data Harvest
website . To update the firmware of your EASY SENSE Q logger:
Step 1. Copy the English Firmware Update for either Q3+ (403x) or Q5+ (405x), as
appropriate, onto the hard disc of your computer and run the .exe.
Step 2 . Connect EASY SENSE Q to the
computer using the USB cable.
Step 3. Carry out a HARD RESET on Q
by holding down the red and both blue
buttons for a second, then release.
Wait for a few seconds.
A progress bar will indicate
EASY SENSE Q being programmed.
A tick will indicate if the process was
successful. Disconnect the EASY SENSE
Q logger.
If you wish to repeat these processes,
connect another
EASY SENSE Q logger
and click on the update window to return
to the start screen (step 2).
A
cross will indicate that an error
occurred. Click in the update window to
go back to start screen (step 2) and try
again.
Step 4
. Exit the program.
©
Data Harvest Group Ltd.
29