3
What else is required?
Sensing Science Laboratory
or
Primary
software – a specific application that allows
transfer of the captured data to a computer for display and analysis and has the
USB
drivers
for
EasySense Q
(these are located on the Sensing Science Laboratory or
Primary CD ROM).
Note:
To use EasySense Q you will need Issue 4 or higher of the Sensing Laboratory or Primary
PC Windows software (Product No. 6488 or 6489 respectively) V1.09 i.e. Graph V2.51, Meter
V1.35, Timer V1.24, Workroom V1.22.
The
EasySense Q
data logger
EasySense Q
is a fully self-contained portable data logger. It has built-in sensors, which
allow collection of data.
The current measurement from a sensor can be viewed on the LCD screen. Data can
be gathered either when
EasySense Q
is connected to a computer or stored as data
sets in its memory for retrieval and analysis by the computer at a later date. Up to four
data sets can be stored at a time.
EasySense Q
buttons
EasySense Q
has three buttons that are used to select the operating mode.
The green triangle (ENTER) is used to start data collection, to confirm a choice or
take a sample.
The red square (STOP) is used to end data being recorded or return to the main
menu.
DA A
A
R
H
VE
T
T
S
INPUT
1
A
2
B
Q
SENSE
EASY
5
D A T A L O G G E R
POWER
Meter
Snapshot
EasyLog
Timer
Inputs for plug-in sensors
(dual labelled as 1A and 2B)
Q 3 & 5 - built-in Light sensor
(visible in square slot)
Q 3 & 5 - built-in Sound sensor
(grid visible)
Q 3 & 5 - built-in
Temperature
sensor
(not visible)
USB
compatible input
Connection for
power supply
Power light
Green triangle
(ENTER/SELECT
button)
Yellow arrow
(SCROLL down
button)
Red square
(STOP button)
LCD Display
Q 5 only - built-in Humidity
sensor (grid visible)
Q 5 only - built-in Barometric
Pressure sensor (not visible)
