16
and time) each time it is connected to the computer and one of the Sensing Science pro-
grams is run.
Note:
If the date or time on a data set is not correct, check the date/time settings on your
computer.
EasySense Q’s
memory
EasySense Q’s
memory space is divided into 4 ‘data slots’ and so can store four
investigations that have been collected in standalone mode (when not connected to the
computer). Each slot is filled in turn. Once the 4
th
slot is used
EasySense Q
will begin to
overwrite existing data starting at memory slot 1 (the earliest data set).
The experiments are identified by date; time & logging type i.e. Easy Log, Snapshot
Meter, Timer or Remote and duration.
Specifications
4 x 20 Character LCD Display.
USB compatible communication V1.1.
Memory Capacity: 4 x data sets.
Rate: 50 samples per second max logging speed.
Digital timing from A to B accurate to 2 decimal places.
10 bit sampling resolution.
Note:
Smart Q Sensors are capable of 12 bit resolution. Specifications stated for Smart Q
Sensors are applicable to when used with a 12 bit data logger or interface e.g. EasySense
Advanced. EasySense Q is a 10 bit data logger so may not be able to fully utilise this capability
and the resolution stated for each Sensor may not be as high.
Care & Maintenance
Clean with a damp cloth, do not immerse in water or detergent.
EasySense Q
is suitable for use in an operating range of 0 - 40°C and 0 to 95%RH
(non-condensing).
Do not subject to extreme heat or cold or leave in a location where it will get wet.
EasySense Q
is not waterproof.
Apart from the battery pack there are no user serviceable parts inside
EasySense Q
.
Trouble Shooting
Before reporting a fault please attempt a
HARD RESET
of the unit.
1. Connect to the mains power supply.
2. Hold down the three buttons (green triangle, red square and
yellow arrow) for a second then release.
If the hard reset has been done correctly, the LCD will momentarily display
EasySense Q
before returning to the main menu.
If you are experiencing a problem, please contact the Technical Support department at
Data Harvest. Please provide details of:
#
The computer platform it is being used with.
+
+
