12
This application is used for recording and
graphing signals from sensors. There are
facilities for analysing data, setting the
recording method, and retrieving the data
sets stored in
EasySense Q
.
This application can be used to alter the range
of the built-in light sensor on
EasySense Q
or
those
Smart Q
sensors that have either multiple
ranges or are capable of user calibration.
This application is used to allow students to
study Time, Velocity and Acceleration
relationships using of digital (switch-type)
sensors and retrieval of Timer data sets
stored in
EasySense Q.
The purpose of this application is to allow the
selection of experimental worksheets. The
worksheets can be written by the user or
purchased as pre-prepared HTML files. These
HTML files can be loaded into a word
processor and then customised by the user.
Workroom
Timer
Sensor Config
Graph
Collect remote data option
The Start icon is used to begin a recording
The New recording Wizard is used to set the
available options before data is captured
e.g. real time or remote recording, length of
recording, deselecting built-in sensors,etc.
