Data Domain DD400 Series Скачать руководство пользователя страница 113

Страница: 113 / 300

Chapter 8: Alerts and System Reports

Autosupport Reports

For example, after adding the email address

[email protected]

to the list, the test for that

address would be:

autosupport send [email protected]

Set the Schedule

To change the date and time when a restorer automatically runs a verbose autosupport report, use
the

set schedule

operation. The default time is daily at 3 a.m. (

daily 0300

). The operation

is available only to administrative users.

•

day

is required with the

weekly

and

monthly

options.

Day

is one or two numerals from

1 to 31 when used with the

monthly

option.

Day

is the first three letters of a day (for

example,

tue

for Tuesday) with the

weekly

option. Use a dash (-) between days for a range of

days. For example:

tue-fri

•

time

is required. 2400 is not a valid time. An entry of

0000

is midnight at the beginning of

a day.

•

The

weekly

option with

day

and

time

or the

day

and

time

options without

weekly

run

the report once a week.

•

The

never

option turns off the report. Set a schedule using any of the other options to turn on

the report.

autosupport set schedule [daily | weekly | monthly | never]
[

day1

day2

,...]]

time

For example, to run the report automatically every Tuesday at 4 a.m, use either of the following
two commands.:

autosupport set schedule tue 0400

autosupport set schedule weekly tue 0400

The most recent invocation of the scheduling operation cancels the previous setting. To run the
report more than once in a time period, set multiple days in one command. Use a dash (-) between
days for a range of days, such as

tue-fri

. For example, to run the report on the first and fifteenth of

the month at 4 a.m.:

autosupport set schedule monthly 1,15 0400

Reset the Schedule

To reset the autosupport report to run at the default time, use the

autosupport reset

schedule

operation. The default time is Sunday at 3 a.m. The operation is available only to

administrative users.

autosupport reset schedule

Содержание DD400 Series













































































































































































































































































































Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды

Data Domain DD400 Series, Руководство пользователя

Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды