Data Domain DD400 Series Скачать руководство пользователя страница 112

Страница: 112 / 300

Autosupport Reports

DD400 Series Restorer User Guide

Autosupport Reports

Use the

autosupport

command to administer the automatic system-reports feature.

Add to the Email List

To add an email address to the autosupport report list, use the

autosupport add

operation. By

default, the list includes an address for Data Domain support staff. The

email-list

is a list of

addresses that are comma-separated or space-separated or both. After adding to the list, always use
the

autosupport send

operation to test the address. Administrative users only.

autosupport add

email-list

For example, to add a an email address to the list:

autosupport add [email protected]

Remove from the Email List

To remove an email address from the autosupport report list, use the

autosupport del

operation. The operation is available only to administrative users. The

email-list

is a list of

addresses that are comma-separated or space-separated or both. Administrative users only.

autosupport del

email-list

For example, to remove an email address from the list:

autosupport del [email protected]

Reset the Email List

By default, the list includes an address for Data Domain support personnel. The

autosupport

reset

operation returns the list to the default address. The operation is available only to

administrative users.

autosupport reset support-list

Test the Autosupport Report Email List

To create an autosupport report and send it to all addresses in the email list or to a specific address,
use the

autosupport send

operation. After adding addresses to the list, always use this

operation to test the address.

autosupport send [

email-addr

]

Содержание DD400 Series













































































































































































































































































































Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды

Data Domain DD400 Series, Руководство пользователя

Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды