Dasan V8102, Руководство пользователя

Страница: 524 / 910

UMN:CLI
User Manual
V8102
524
tion is held.
In PIM-DM, however, the DR only plays a role of the alternative IGMP querier using this
DR election when multiple routers exist with IGMPv1, since IGMPv1 does not define any
IGMP querier election process. To specify the DR priority on an interface, use the follow-
ing command.
Command Mode Description
ip pim dr-priority
< 0-4294967294>
Interface
[VLAN]
Specifies the DR priority on an interface.
0-4294967294: priority value (default: 1)
no ip pim dr-priority
< 0-4294967294>
Deletes the specified DR priority.
no ip pim dr-priority
The DR and the IGMP querier may be different routers in IGMPv2, while those are typi-
cally the same router in IGMPv1. In IGMPv2, the DR is the router with the highest IP ad-
dress on the subnet, whereas the IGMP querier is the router with the lowest IP address.
10.3.2.3 Neighbor Filtering
If necessary, you can filter neighbor routers using access lists. When you enable this fea-
ture, PIM establishes adjacency without neighbor routers specified as deny in access lists.
To enable filtering neighbor routers in PIM, use the following command.
Command Mode Description
ip pim neighbor-filter {<1-99> |
WORD } Interface
[VLAN]
Enables filtering neighbor routers in PIM.
1-99: IP standard access list
WORD: access list name
no ip pim neighbor-filter {<1-99>
| WORD }
Disables filtering neighbor routers in PIM.
To display the information of PIM neighbor routers, use the following command.
Command Mode Description
show ip pim neighbor [ detail ]
Enable
Global
Shows the information for PIM neighbor routers.
10.3.2.4 PIM Join/Prune Message Group Filtering
If necessary, you can filter PIM join/prune messages from separate group using access
lists. When you enable this feature, a specified PIM group of PIM join/prune messages
from the trusted neighbor are denied by a specified range of access lists.
To enable PIM group filtering, use the following command.
Command Mode Description
ip pim group-filter {<1-99> |
WORD }
Interface
Enables PIM group filtering to block PIM join/prune
messages using a specified access list.
i