Dasan V8102, Руководство пользователя

Страница: 521 / 910

User Manual
UMN:CLI
V8102
521
show ip mroute { dense | sparse }
count
Global Shows the multicast routing statistics entries for a giv-
en PIM mode.
dense: dense mode
sparse: sparse mode
show ip mroute A.B.C.D [ dense |
sparse ] count
Shows the multicast routing statistics entries for a giv-
en group.
A.B.C.D: group address
show ip mroute A.B.C.D A.B.C.D
[ dense | sparse ] count
Shows the multicast routing statistics entries for a giv-
en group and source.
A.B.C.D: group/source address
show ip mroute A.B.C.D/M
[ dense | sparse ] count
Shows the multicast routing statistics entries for a giv-
en group range.
A.B.C.D/M: group address and prefix
To delete the multicast routing statistics entries from the multicast routing table, use the
following command.
Command Mode Description
clear ip mroute statistics *
Enable
Global
Deletes all multicast routing statistics entries.
clear ip mroute statistics
A.B.C.D [ A.B.C.D ]
Deletes a specific multicast routing statistics entry.
A.B.C.D: group/source address
10.3.1.9 Displaying MFIB Information
The multicast forwarding information base (MFIB) is the group of the information to for-
ward multicast traffic in Layer 3, which is maintained by currently running multicast routing
protocol. You can verify the forwarding entries in the MFIB with the
show ip mfib com-
mand.
To display the multicast forwarding entries in the MFIB, use the following command.
Command Mode Description
show ip mfib [ vlan VLANS |
group A.B.C.D ] [ detail ]
Enable
Global
Shows the multicast forwarding entries in the MFIB.
VLANS: VLAN ID (1-4094)
A.B.C.D: multicast group address
10.3.1.10 MRIB Debug
To debug events in the MRIB, use the following command.
Command Mode Description
debug nsm mcast { all | fib-msg |
mrt | register | stats | vif }
Enable
Debugs events in the MRIB.
all: all multicast debugging
fib-msg: MFIB messages
mrt: multicast routes
register: multicast PIM register messages
stats: multicast statistics