User Manual
UMN:CLI
V8102
259
tos
{<0-255>
| range
<0-255>
<0-255>
} | pkt-size
{
lt
<0-65535>
| gt
<0-65535>
| range
<0-
65535>
<0-65535>)
| fragments |
log | interface
{
in | out
}
[{
tengi-
gabitethernet IFPORT | gpon
IFPORT
|
channelgroup IFPORT
| vlan VLANID
}]
icmp-type: the actual ICMP value
label: Identifies an application.
precedence: Identifies a packet filter precedence level.
tos: Type of service (ToS) value to filter packets.
pkt-size: Identifies packet size.
gt: packet size less than or greater than specified val-
ue.
lt: packet size less than or greater than specified value.
(0-65535: packet size)
fragments: An ACL applies to the non-initial fragment of
packet.
log: logs the results.
interface: the name of the input or output interface.
no
ipv6
access-list
zebos
WORD
{
deny | permit
}
icmp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
{
DES_ADDR
|
DES_ADDR_RANGE
|
any
}
[{
icmp-type ICMP-TYPE | label
<1-65535>
| precedence
<0-7>
|
tos
{<0-255>
| range
<0-255>
<0-255>}
| pkt-size
{
lt
<0-65535>
| gt
<0-65535>
| range
<0-
65535>
<0-65535>
| fragments |
log | interface
{
in | out
}
[{
tengi-
gabitethernet IFPORT | gpon
IFPORT | channelgroup IFPORT
| vlan VLANID
}]
Deletes the configured ZeBos extanded ACL entry.
7.18.10.2
IPv6 Access List ZeBos for TCP
To create an access-list (ACL) to filter packets specific to the TCP protocol, use the fol-
lowing command.
Command
Mode
Description
ipv6 access-list zebos WORD
{
deny
|
permit
}
tcp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
[{
eq
|
lt
|
gt
|
ne
} <0-65535> |
range
<0-65535> <0-65535>]
{
DES_ADDR
|
DES_ADDR_RANGE
|
any
}
[{
eq
|
lt
|
gt
|
ne
} <0-65535> |
range
<0-65535> <0-65535>]
Global
Specifies a deny or permit statement of the Zebos ex-
tanded ACL to filter packets specific to the TCP proto-
col.
WORD: access-list name
deny: specifies route to deny.
permit: Specified route to permit.
SOUR_ADDR: source IPv6 address to match
(X:X::X:X/M)
SOUR_ADDR_RANGE: source IPv6 address range to
match (X:X::X:X X:X::X:X)
DES_ADDR: destication IPv6 address to match
(X:X::X:X/M)
DES_ADDR_RANGE: destication IPv6 address range
to match (X:X::X:X X:X::X:X)
ipv6 access-list zebos WORD
{
deny
|
permit
}
tcp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
Содержание V8102
Страница 1: ...1 V8102 GPON OLT system User Manual...
Страница 158: ...UMN CLI User Manual V8102 158 When you use the no snmp command all configurations of SNMP will be lost...
Страница 427: ...User Manual UMN CLI V8102 427 show debugging dhcp Enable Global Shows the debugging information of DHCP...
Страница 797: ...User Manual UMN CLI V8102 797 show onu gsp status config ONU_ID tag list number TAG_NAME tag name...