Design by Constantin Wortmann
Assembly doctor for SPACEWALKER
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
+32(0)50/71.81.38
www.dark.be
fax
mail
kg
40
m
0.2
IP20
°C
850
V0 7/01/2021
ATTENTION !!
DO NOT PLACE THE SPACEWALKER
BODY ON HIS HEAD !!
1
2
3
4
5
5
1
6
3X
5
1. Screw the gripper on the ceiling.
2. Put the steelcable through the lamp rod and plastic bottom cap.
Fixate the cable in the gripper.
Lock the cable on the preferred height.
3. Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
(not for LED frame)
4. Place the T5/LED frame into the body and fasten the 3 bolds and washers
(Max force: 1,5N/m).
Lower the bottom cap between the legs.
5. Place the connection box on the ceiling and connect the power supply.
6. Place the fluo pink cable into backpack body
and fixate the other end on the ceiling.
lamp possibilities:
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
CONNECTION Dimmable version
Green/Yellow
Red (-) or
Black (-)
White (+)
Dimmer (1-10V)
LED
80+
CRI
mA
276
8000
Lm
Watt
>100
DALI
1 ... 10V
NO DIM
WW
RGB(W)
T5
NO DIM
1 ... 10V
ONE4ALL
Watt
max
2
21
1/
/3
39
9
standalone
DMX
DALI
LED
80+
CRI
mA
350
3500
Lm
Watt
>70
Design by Constantin Wortmann
Assembly doctor for SPACEWALKER
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
+32(0)50/71.81.38
www.dark.be
fax
mail
kg
40
m
0.2
IP20
°C
850
V0 7/01/2021
ATTENTION !!
DO NOT PLACE THE SPACEWALKER
BODY ON HIS HEAD !!
1
2
3
4
5
5
1
6
3X
5
1. Screw the gripper on the ceiling.
2. Put the steelcable through the lamp rod and plastic bottom cap.
Fixate the cable in the gripper.
Lock the cable on the preferred height.
3. Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
(not for LED frame)
4. Place the T5/LED frame into the body and fasten the 3 bolds and washers
(Max force: 1,5N/m).
Lower the bottom cap between the legs.
5. Place the connection box on the ceiling and connect the power supply.
6. Place the fluo pink cable into backpack body
and fixate the other end on the ceiling.
lamp possibilities:
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
CONNECTION Dimmable version
Green/Yellow
Red (-) or
Black (-)
White (+)
Dimmer (1-10V)
LED
80+
CRI
mA
276
8000
Lm
Watt
>100
DALI
1 ... 10V
NO DIM
WW
RGB(W)
T5
NO DIM
1 ... 10V
ONE4ALL
Watt
max
2
21
1/
/3
39
9
standalone
DMX
DALI
LED
80+
CRI
mA
350
3500
Lm
Watt
>70
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on
www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
+32 50 71 81 40 / [email protected] /
www.dark.be
ASSEMBLY DOCTOR
spacewalker
design Constantin Wortmann for dark
V—22/08/22
1
Screw the gripper on the ceiling.
2
Put the steelcable through the lamp rod and plastic
bottom cap. Fixate the cable in the gripper. Lock the
cable on the preferred height.
3
Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
(not for LED frame)
4
Place the T5/LED frame into the body and fasten the 3 bolds and
washers (Max force: 1,5N/m).
Lower the bottom cap between the legs.
5
Place the connection box on the ceiling and connect the power supply.
6
Place the fluo pink cable into backpack body and fixate the other end on
the ceiling.
!!! Never connect the fixture on 220-240V ac without driver.
Lighting fixture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
PE-Metal
230 V
IP20
850°
