Darex V390, Руководство по эксплуатации, Страница: 3 / 21

Safety Instructions
WARNING:
REMEMBER FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL
BEFORE OPERATING TOOL AND SAVE THESE INSTRUCTIONS.
Wear Eye Protection. Never touch internal parts of the sharpener
when the sharpener is on. The rotating grinding wheel can cause
injury. Use caution when replacing the grinding wheel. Follow
instructions entitled “Replacing The Grinding Wheel”, in this
Instruction Manual. Regularly empty accumulated grinding dust.
Follow instructions entitled “DAREX V390 Maintenance” in this
Instruction Manual.
WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO PREVENT THE
RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY,
INCLUDING THE FOLLOWING:
1.KEEP GUARDS IN PLACE and in working order. Never perform
grinding operation with the wheel cover removed.
2. REMOVE WRENCHES. Form a habit of checking to see that the
wrench is removed from tool before turning it on.
3 .KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
4. DON’T USE IN DANGEROUS ENVIRONMENT. Do not use power
tools in damp or wet locations, or expose them to rain.
5. STORE EQUIPMENT in a safe place when not in use. Keep out
of reach of children.
6. DON’T FORCE TOOL. It will do the job better and safer at the
rate for which it was designed.
7. USE THE RIGHT TOOL. Don’t force tool or attachment to do a
job it was not designed for.
8. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if
cutting operation is dusty. Everyday eyeglasses only have
impact resistance lenses, they are NOT safety glasses.
9. MAINTAIN TOOL WITH CARE. Keep tools sharp and clean for
best and safest performance.
10. DISCONNECT TOOLS from the power supply before service.
11. AVOID ACCIDENTAL STARTING Make sure switch is in the “OFF”
position before plugging it in.
12. USE RECOMMENDED ACCESSORIES, Consult the owner’s
manual for recommended accessories. The use of improper
accessories may cause hazards.
13. CHECK FOR DAMAGED PARTS. Before further use of the tool, a
guard or other part that is damaged should be carefully checked to
assure that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced.
14. DO NOT USE DAMAGED OR UNSHAPED WHEELS. Use grinding
wheels suitable for speed of grinder.
15. NEVER LEAVE TOOL RUNNING UNATTENDED. Turn power off.
16. USE PROPER EXTENSION CORD. Make sure extension cord is in
good condition. When using an extension cord be sure to use one
heavy enough to carry the current the Drill Sharpener will draw. An
undersize cord will cause a drop in line voltage, resulting in a loss of
power and/or overheating.
17. The continuous A-weighted equivalent sound pressure level at
the operator’s ear is not over 60 dB (A).
18. Risk of injury due to accidental starting. Do not use in an area
where children may be present.
19. The weighted root mean square acceleration value to which the
arms are subjected to does not exceed 2.5 m/s2
GROUNDING INSTRUCTIONS
1. All grounded, cord connected tools:
In the event of a malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of
electric shock. This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding plug. The plug
must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided-if it will not fit the outlet, have the
proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. The conductor with insulation,
having an outer surface that is green with or without yellow stripes,
is the equipment-grounding conductor. If repair or replacement of
the electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to
whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs
and 3-pole receptacles that accept the tool’s pIug.
Repair or replace damaged or worn cord immediately. See table 1
minimum gauge cord below.
2. Grounded, cord-connected tools intended for use on a supply
circuit having a nominal rating less than150 volts:
This tool is intended for use on a circuit that has an outlet that looks
like the one illustrated in Figure A. The tool has a grounding plug
that looks like the plug illustrated in Figure A. A temporary adapter
which looks like the adapter illustrated in Figures B and C, may be
used (except in Canada) to connect this plug to a 2-pole receptacle
as shown in Figure B, if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician. The green
colored rigid ear lug, etc. extending from the adapter must be
connected to a permanent ground such as a properly grounded
outlet box. See Fig. 1. Grounding methods below.
3. Grounded, cord-connected tools intended for use on a
supply circuit having a nominal rating between 150-250 volts,
inclusive. See
Table 1. Minimum gauge for cord below.
Table 1. Minimum Gauge Cords
Fig .1
Grounding
methods
Grounded
Means
Cover of
grounded
outlet box
Grounding Pin
Grounding Pin
Metal
Screw