DARAY X340, Руководство по эксплуатации и установке

Страница: 8 / 48

Page 7 of 43
2.1 Pre-Installation Responsibilities and component packing list
This document is a guide to the steps that need to be performed to correctly install
the X340 Examination light. However, the work required to be performed is the
responsibility of the owner or designated contractor/s.
All fixings between DARAY lights and the building super-structure must be approved
by either the chief project engineer or an appropriate and competent structural
assessor.
The components supplied by DARAY for fitting / installation should be the following
items in the specified quantities.
X340LD/FDM/S Qty. X340LW Qty.
24V Plug top transformer 1 24V Plug top transformer 1
Desk Clamp/Fixed Desk Mount/Desk
Stand 1 Wall b fixings 1
Light head and rigid arm system 1 Thumb Screw for Wall Mount 1
Microfibre cloth 1 Light head and rigid arm system 1
User Manual 1 Microfibre cloth 1
User Manual 1
X340LR Qty. X340LM Qty.
12V Plug top transformer 1 IEC Cable (3m) 1
Rail Clamp 1 24V PSU + bracket kit
Thumb Screw for Rail Clamp 1 Mobile base (3 pieces) 1
Light head and rigid arm system 1 Light head and rigid arm system 1
Microfibre cloth 1 Microfibre cloth 1
User Manual 1 User Manual 1
X340LE1 Qty. X340LE2 Qty.
24V Transformer 1 24V Transformer 1
BESA Wall Bracket (W3) 1 Spreader Plate Wall Bracket (W4) 1
Light head and rigid arm system 1 Light head and rigid arm system 1
Microfibre cloth 1 Microfibre cloth 1
User Manual 1 User Manual 1