DARAY X100, Руководство по эксплуатации и установке, Страница: 14 / 28

Page 13 of 22

Fit the spigot on the end of the light arm into the top of the clamp, make
sure it is fully secured in place.

Apply the power cable, and power the light on. See page 8.
4.4 Mobile version (X100LM)

Remove the light from its packaging.

If not already fitted, fit the castors to the base by knocking them sharply
into their fixing sockets.

Insert the up-stand into the castor base as shown below.
Do not use a metal hammer.
Once fitted, the up-stand will not be able to be removed from the castor
base.

Insert the light-arm's spigot into the top of the upstand and tighten the knob
to secure it in place.
WARNING: DO NOT LIFT THE LIGHT BY THE FLEXIBLE ARM AS THIS CAN
CAUSE DAMAGE