DAPAudio WCSS-230 G2, Руководство пользователя, Страница: 13 / 28

12
WCSS-230 G2 WiFi Speaker
Product code: D6451
Connecting the Passive Speaker
Use signal cables to connect the 2-pin terminal connector OUT (12) of the active speaker to the 2-pin
terminal connector IN (16) of the passive speaker. Make sure that the cable polarity is correct (+/-)
(Fig. 09).
Fig. 09
Setting the Signal Type
You can set the signal type (mono or stereo).
● Set the stereo/mono switch (10) to STEREO when the passive speaker is connected.
● Set the stereo/mono switch (10) to MONO when the passive speaker is not connected.
Setting the Volume Limiter
You can activate the volume limiter. When the volume limiter is active, the total output (2 x 30 W) will be
limited to 50 % (2 x 15 W).
Set the volume limiter switch (11) to LIMITER ENABLED to activate the volume limiter.