DAPAudio PSS-110 MKIII, Руководство пользователя

Страница: 20 / 24

19
PSS-110 MKIII
Ordercode: D2611
Maintenance
The DAP Audio PSS-110 MKIII requires almost no maintenance.
However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below.
01)
Unplug the unit from electric power source.
02) Insert a screwdriver into the slot in the fuse cover. Gently pry up the fuse cover. The fuse will come
out.
03) Remove the used fuse. If brown or unclear, it is burned out.
04) Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
Troubleshooting
No Sound
Always check if all the cables and cords are connected. Always turn off power to the area before
checking the wires, to prevent electric shock.
If everything works properly and there is still no sound, revisit the manufacturer’s instructions to make sure
they were followed during installation. If everything was installed correctly and there is still no sound, you
may want to consider bringing in a professional to take a look at your speaker.
If the speaker does not operate properly, refer servicing to a technician.
Suspect three potential problem areas as: the battery, the speaker, the fuse.
01)
The battery. Check if the battery is fully charged. If it is not, it needs to be recharged. See page 13 for
battery operation.
02) The speaker. Return the PSS to your DAP Audio dealer.
03) The fuse. Replace the fuse. See page 19 for replacing the fuse.
04) If all appears to be O.K., turn the unit on again.
05) If you are unable to determine the cause of the problem, do not open the PSS, as this may damage
the unit and the warranty will become void.
06) Return the device to your DAP Audio dealer.