DAPAudio PSS-110 MKIII, Руководство пользователя

Страница: 16 / 24

15
PSS-110 MKIII
Ordercode: D2611
Frequency Range
00 – 615,125MHz
01 – 615,350MHz
02 – 615,575MHz
03 – 615,800MHz
04 – 616,025MHz
05 – 616,250MHz
06 – 616,475MHz
07 – 616,700MHz
08 – 616,925MHz
09 – 617,150MHz
10 – 617,375MHz
11 – 617,600MHz
12 – 617,825MHz
13 – 618,050MHz
14 – 618,275MHz
15 – 618,500MHz
16 – 618,725MHz
17 – 618,950MHz
18 – 619,175MHz
19 – 619,400MHz
20 – 619,625MHz
21 – 619,850MHz
22 – 620,075MHz
23 – 620,300MHz
24 – 620,525MHz
25 – 620,750MHz
26 – 620,975MHz
27 – 621,200MHz
28 – 621,425MHz
29 – 621,650MHz
30 – 621,875MHz
31 – 622,100MHz
32 – 622,325MHz
33 – 622,550MHz
34 – 622,775MHz
35 – 623,000MHz
36 – 623,225MHz
37 – 623,450MHz
38 – 623,675MHz
39 – 623,900MHz
40 – 624,125MHz
41 – 624,350MHz
42 – 624,575MHz
43 – 624,800MHz
44 – 625,025MHz
45 – 625,250MHz
46 – 625,475MHz
47 – 625,700MHz
48 – 625,925MHz
49 – 626,150MHz 50 – 626,375MHz
51 – 626,600MHz
52 – 626,825MHz
53 – 627,050MHz
54 – 627,275MHz
55 – 627,000MHz
56 – 627,725MHz
57 – 627,950MHz
58 – 628,175MHz
59 – 628,400MHz
60 – 628,625MHz
61 – 628,850MHz
62 – 629,075MHz
63 – 629,300MHz
64 – 629,525MHz
65 – 629,750MHz
66 – 629,975MHz
67 – 630,200MHz
68 – 630,425MHz
69 – 630,650MHz
70 – 630,875MHz
71 – 631,100MHz
72 – 631,325MHz
73 – 631,550MHz
74 – 631,775MHz 75 – 632,000MHz
76 – 632,225MHz
77 – 632,450MHz
78 – 632,675MHz
79 – 632,900MHz
80 – 633,125MHz
81 – 633,350MHz
82 – 633,575MHz
83 – 633,800MHz
84 – 634,025MHz
85 – 634,250MHz
86 – 634,475MHz
87 – 634,700MHz
88 – 634,925MHz
89 – 635,150MHz
90 – 635,375MHz
91 – 635,600MHz
92 – 635,825MHz
93 – 636,050MHz
94 – 636,275MHz
95 – 636,500MHz
96 – 636,725MHz
97 – 636,950MHz
98 – 637,175MHz
99 – 637,400MHz
It is possible that the PSS-110 MKIII will not function properly within certain frequencies.
It may be caused by the presence of other digital equipment producing interference.
Try testing all the available frequency presets until you find the one which functions
properly.
Tips for Achieving Maximum Performance
● Make sure you can always see the receiver antenna from the transmitter position.
● Keep the distance between the PSS antennas and the microphone as short as possible.
● Point the PSS antennas away from each other, at a 45° angle from vertical position.
● Avoid placing the antennas in the vicinity of metal surfaces and obstructions.
● Recharge the battery as soon as you receive a low-battery alarm.
● Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the PSS. If dead spots remain, mark and avoid them.