DAPAudio PSS-108 MKII, Руководство пользователя

Страница: 13 / 16

12
Ordercode: D2608 / D2609
PSS-108 MKII / PSS-110 MKII
Operation of the wireless microphones
Inserting/replacing the battery
We recommend powering the microphone by a 9V PP3 alkaline battery.
● Push down (1) the cover in the direction of the arrow.
● Slide (2) the cover in the direction of the arrow.
● Insert the battery. Please observe correct polarity when inserting the battery.
● Close and lock the battery cover.
Tips for achieving maximum performance.
● Make sure you can always see a receiver antenna from the transmitter position.
● Keep the distance from transmitter to receiver antenna as short as possible.
● Point the receiver antennas away from each other at 45 degrees angle from vertical position.
● Avoid placing the receiver antennas near metal surfaces and obstructions.
● Replace battery as soon as low battery LED lights.
● Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the receiver. If dead spots remain, mark the dead spots and avoid them.