DAPAudio PRA-62, Руководство пользователя

Страница: 9 / 12

Ordercode: D3507
PRA-62 2 x 25W
Names and Functions
01) Volume control
Turn the control to adjust output’s volume.
02) Treble control
Turn the control to adjust output’s treble.
03) Bass control
Turn the control to adjust output’s bass.
04) Power switch ON/OFF
Press the button to switch the device ON/OFF.
05) IEC power connector 230V AC + Fuse F1AL/250V
This connector is meant for the connection of the supplied power cable. Connect one end of the
power cable to the connector, the other end to the mains, then turn on the power switch to operate
the unit.
06) Speaker cable connector OUT
Connect the active PRA-62 speaker to the passive PRA-62 speaker, by means of the included
speaker cable.
07) RCA line connectors IN
Connect input signal (for example, from a mixer) to the speaker, by means of an RCA cable.
Maintenance
The DAP Audio PRA-62 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below.
01) Unplug the unit from electric power source.
02) Insert a screwdriver into the slot in the fuse cover. Gently pry up the fuse cover. The fuse will come
out.
03) Remove the used fuse. If brown or unclear, it is burned out.
04) Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
8