DAPAudio HM-30, Руководство пользователя

Страница: 5 / 8

HM-30
Ordercode: D1380
Description of the device
Features
The DAP HM-30 is a modern rendition of the legendary crystal-type microphone, used with a blues harp.
• Type: Dynamic, moving coil
•
Frequency response: 40 Hz - 16 kHz (-3 dB)
•
Polar pattern: Cardioid
• Sensitivity: 1,2 mV/Pa -58 dB –
•
Max. SPL: 140 dB
• Impedance: 220 Ohm
•
Included: Stand mount and 3-pin XLR cable
•
Connections: 3-pin XLR IN
• Dimensions: 77 x 68 x 90 mm (LxWxH)
•
Weight: 0,28 kg
Overview
Fig. 01
Installation
Remove all packing materials from the HM-30. Check if all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Set all volume and gain controls on your mixer, mic preamp or recording device to their minimum settings
before connecting the microphone. Make sure that the phantom power is turned off!
Once the HM-30 is plugged in, move the channel fader gradually to the 0dB position. Adjust the input
gain using your channel peak LED or a VU-meter.
Power ON
01) Plug one end of the included 3-pin XLR cable into the XLR input on the HM-30.
02) Plug the other end of the XLR cable into your mixing board.
4