DAPAudio GIG-1000CFX, Руководство пользователя

Страница: 7 / 28

Ordercode: D2286
GIG-1000CFX
Description of the device
Features
• Ultra-low noise discrete MIC Preamps with +48V Phantom Power.
•
Input voltage: 100-240V, 60/50Hz
• Power consumption: 1000W
•
4 MIC Input Channels with XLR and balanced Line Input, Insert I/O and Compressor control.
•
Low Cut for each MIC Input.
• 2 Stereo Input Channels with mono XLR Input and TRS Jack / RCA Jack and TRS Jack.
•
3-band EQ and Peak LED on each MIC channel.
• 2-band EQ and Peak LED on Stereo channels.
•
2 x 6,3 mm jack amplifier input (left and right)
•
2 x Speakon speaker output (left and right)
• Amp limiter indicator
•
1 AUX Send POST/PRE per channel for monitoring or external effects, 1 FX send POST Fader for internal
effects or monitoring.
•
Mute and PFL function for each channel, 60mm fader for level control.
•
GR1/2 and Main L/R bus assign for each channel.
• 2-track Input assignable to Main Mix or Control Room/Headphone Output.
•
Balanced XLR & TRS outputs for Main Mix.
•
Built-in 24-bit DSP effect with 100 presets.
•
Fuse: T6,3AL/250V
•
Dimensions: 455 x 352 x 128 mm (LxWxH)
• Weight: 4kg
Overview
Installation
Remove all packing materials from the GIG-1000CFX. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
6