DAPAudio GIG-1000CFX, Руководство пользователя

Страница: 17 / 28

Ordercode: D2286
GIG-1000CFX
Option Three - Bluetooth Version 2.1
(Ordercode: D2292)
Can be paired with mobile phones, tablets or PC Bluetooth adapters to play stereo audio.
DISPLAY
These two LEDs are used to display different working states:
01) For the first time that the module is powered on, it is in stand-by state and the right
LED flashes twice about 2 seconds.
02) Matching state, two LED's alternately flash quickly.
03) After connecting the device, the right LED is lighted constantly.
PRE: Press this button to go back to the beginning of the current track or select a previous
track for playing.
NEXT: Press this button to skip to the next track.
VOL-: Press the VOL- button to decrease the volume. The default factory setting is
maximum.
VOL+: Press the VOL+ button to increase the volume.
PLAY/PAUSE: Press this button to start playback. Press once to start playback, twice to set
the pause mode and again to resume playback.
PAIR: Press this button and hold it down for 2-3 seconds, the player will change to
matching state. In this state, the two LEDs will quickly flash and you can use your mobile
phone, tablet or PC Bluetooth adapter to find devices, BT-2.1. If your device's Bluetooth
version is older than 2.0, you should enter the password "0000". If your device's Bluetooth
version newer than 2.0, you do not need to enter the password.
16