DAPAudio DVMP-250, Руководство пользователя

Страница: 18 / 32

17
Ordercode: D1133
DVMP-250
B. Audio Setup
Includes:
01) Speaker Setup
Use the
cursor (42/44/46/59) buttons to select Speaker Setup and push the OK (58) button to open the
Speaker Setup menu.
The speaker setupmenu gives allows you to adjust the following parameters:
•
Downmix:
LT/RT : A kind of Dolby Pro Logic format. It is used when the unit is connected to a Dolby Pro receiver
through stereo RCA cables.
Stereo : It is used when the unit is connected to a TV through a scart cable or when the unit
is connected to a Dolby Pro Logic II receiver through stereo RCA cables.
V(irtual) Surr(ound)
With this option, the DVMP-250 widens the sound with a conventional two speaker setup.
5.1 CH
Dolby 5.1 sound.
• Front Speaker
It allows you to setup your DVMP-250 for either large or small speakers.
• Center Speaker
This menu is only accessible if you have selected 5.1 CH mode and allows you to set your system up
for a large or small center speaker or switch the center speaker off.
• Rear Speaker
This menu is only accessible if you have selected 5.1 CH mode and allows you to set your system up
for a large or small set of rear speakers or switch the rear speakers off. Use the
cursor (42/44/46/59)
buttons to select and change parameters and push the OK (58) button to confirm.