DAPAudio DCP-26, Руководство пользователя

Страница: 8 / 36

7
DCP-26
Productcode: D2084
Overview
Input LED indicator
Indicates the input level. Make sure the clip led only lights up
occasionally. The limit led will light up if the internal limiter is actually
limiting the signal.
Item Up button
Pushing the item up button allows select a parameter for editing in
forward direction.
Input channels: Gain – Low pass – High pass – PEQ1 – PEQ2 – PEQ3 –
PEQ4 – PEQ5 - Limiter – Link.
Output Channels: Gain – Mixer - Low pass – High pass – PEQ1 – PEQ2 –
PEQ3 – PEQ4 – PEQ5 – Limiter - Phase – Link.
Channel up button
Pushing the channel up button allows you select an input or output
channel for editing in forward direction: In A – In B – Out 1 – Out 2 –
Out 3 – Out 4 – Out 5 – Out 6.
If two channels are linked, both channels can only be selected and
edited together. E.g. if the display shows “Out 12” output channel 1
and output channel 2 are linked.
Channel down
button
Pushing the channel up button allows you select an input or output
channel for editing in reverse direction: In A – In B – Out 1 – Out 2 – Out
3 – Out 4 – Out 5 – Out 6.
If two channels are linked, both channels can only be selected and
edited together. E.g. if the display shows “Out 12” output channel 1
and output channel 2 are linked.
Item down button
Pressing the item down button allows you to select a parameter for
editing in reverse direction.
Input channels: Link – Limiter – PEQ5 – PEQ4 – PEQ3 – PEQ2 – PEQ1 –
Highpass - Lowpass – Gain.
Output Channels: Link – Phase - Limiter – PEQ5 – PEQ4 – PEQ3 – PEQ2 –
PEQ1 – Highpass - Lowpass – Mixer - Gain.
Output LED indicators
+ mute switches
Indicates the output level. Make sure the clip led only lights up
occasionally. The limit led will light up if the internal limiter is actually
limiting the signal. Pressing the mute button will mute the
corresponding input indicated by the channel’s mute LED.
LCD display To display functions and operating status.
Jogwheel
Dialing the jogwheel allows you to change parameters.
Clicking the jogwheel allows you to enter or confirm.
Menu button
Pushing the menu button allows you to select one of the following
menus for editing: Load – Save – Access level – Version inf
Exit button To leave the last menu/step you were in.