DAPAudio DCP-26, Руководство пользователя

Страница: 33 / 36

32
DCP-26
Productcode: D2084
Product Specifications
Model: DAP Audio DCP-26
DSP:
Sample rate: 48 kHz, 64 bits AllDSP custom Pro-Audio DSP
Inputs:
Input impedance: 10 kOhm balanced
Max input voltage: +22 dBu
Input dynamic range: 110 dB
Input selection: Any Input can be mixed to any output
Input Gain Control: -48 dB to +12 dB in 0,01 dB steps
EQ Sections on each Input and Output
EQ selections: Allpass, Bell, High Shelf, Low Shelf, Notch
Input EQ:
Type: 5-bands EQ.
EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch
EQ Frequency Selection: 20 to 20.000 Hz in 1 Hz steps on all EQ’s
Allpass EQ: Q from 0,2 to 25 in 0,1 steps
Bell EQ (PEQ): Q from 0,2 to 25 in 0,1 steps
EQ gain from -12 dB to +12 dB in 0,01 dB steps
Low Shelf (SEQ): Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,01 dB steps
High Shelf (SEQ): Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,01 dB steps
Notch Filter: Q from 10 to 80 in 0,1 steps
Outputs:
Output Impedance: 100 Ohm balanced
Max output voltage: +9 dBu
Output Gain Control: -48 dB to +12 dB in 0,01 dB steps
Frequency Response: 20 – 20,000 Hz, (-0,1 dB)
Dynamic range: 114 dB
Output delay: Channel independent from 0 to 8 mS
Output delay steps: 21 µS steps from 0 to 8 mS
Output EQ:
Type: 5-bands EQ, same as Input EQ
Crossovers:
Types: Linkwitz Riley, Bessel and Butterworth
Slopes: 6, 12, 18, 24 dB/octave
Crossover frequencies: 20 to 20.000 Hz in 1 Hz octave steps
Crossovers available at Input and Output sections
Limiter:
Threshold points: -48 to +12 dBu in 0,01 dB steps
Attack time: Zero Attack Time Limiter
Release times: 10 - 100 dB/s in steps of 1