DAPAudio Core Scratch, Руководство пользователя

Страница: 7 / 16

6
Core Scratch
D2312
Main channels
Selection switch
(Line (31)/Line (32))
Assign Line (31) or Line (32) to
Channel 1.
Selection switch
(Line (28)/Line (29))
Assign Line (28) or Line (29) to
Channel 2.
Gain control
Adjusts the level of the audio
signal input in each channel.
High control
The High control adjusts the
high frequency range.
Range: -26dB to +12dB at
10kHz.
Low control
The Low control adjusts the
low frequency range.
Range: -26dB to +12dB at
100Hz.
Master/Cue button
The Master/Cue button is
designed to switch between
“Master signal” or Input signal”
on the VU meter..
Channel fader
Adjusts the level of the audio
signal output in each channel.
Crossfader slope switch
This switches the crossfader curve characteristics.
Crossfade ON/OFF
Switch On/OFF crossfade.
Crossfader
Outputs audio signals assigned by the crossfader assign switch corresponding to the curve
characteristics selected by the Cross Fader Curve Selector Switch.