13
Ordercode: D1261
Core Kontrol D2
Operations
Selecting Folders
•
Make sure you’re in the
file system/ folder structure panel
(see page 22).
Push the
back (44)
button
to return to the
file system/ folder structure panel
if you are in the
file/ search results panel.
Turn the
track select (33) encoder
to browse the folders.
•
Push the
track select (33) encoder
to open the desired folder. Now you are in the
file/ search results
panel
and are ready to select a track as described before.
•
Push the
back (44)
button to return to the
file system/folder structure panel
.
Selecting tracks using the track select encoder
•
Make sure you have opened the desired folder as described in
Selecting folders
and that you are in
the
file/ search results panel
(see page 22)
•
Turn the
track select (33) encoder
to browse the tracks.
•
Push the
load A (34) button
or the
load B (43)
button to load the track in respectively the A deck or
the B deck.
Starting Playback
•
Push the
play/ pause (11)
button while in the pause or cue mode to start playback, the LED in the
play/ pause (11)
button lights up.
•
The point at which playback starts is automatically stored in the memory as the cue point. The CD
player will return to the cue point when the
cue (09)
button is pressed.
Stop Playback
There are two ways to stop playback:
•
Push the
play/
pause (11)
button during playback to pause at that point.
•
Push the
cue (09)
button during playback to return to the cue point and enter pause condition.
Pausing
•
Push the
play/ pause (11)
button to pause playback.
•
The
play/ pause (11)
button blinks when the pause mode is set.
•
Playback resumes when the
play/ pause (11)
button is pressed again.
Setting a Cue Point
•
Push the
play/
pause (11)
button to toggle between play mode and pause mode.
•
The play/ pause indicator flashes as the deck is in pause mode.
•
Turn the
jogwheel (32)
to go to the desired cue point.
•
Push the
set cue (10)
button and your cue point will be stored. The cue point will be indicated in the
waveform display as shown in figure 8.
•
Push the
play/ pause (11)
button to continue playback.
Setting a hot cue point in pause mode
•
Push the
play/ pause (11)
button to stop playback.
•
The play indicator flashes when the pause mode is set.
•
Turn the
jogwheel (32)
to go to the desired Cue point.
•
Push the desired
hot cue
(
cue 1 (01)/ cue 2 (02)/ cue 3 (03)
) button and your
hot cue point will be stored.
•
The stored hot cue point will be indicated in the Waveform display as shown in figure 8.
•
Push the
play/ pause (11)
button to continue playback.
Содержание Core Kontrol D2
Страница 26: ...25 Ordercode D1261 Core Kontrol D2...
Страница 30: ...29 Ordercode D1261 Core Kontrol D2 Notes...
Страница 31: ...30 Ordercode D1261 Core Kontrol D2...
Страница 32: ...2015 DAP Audio...
