17
COM-42 2Ch Handheld set
Product code: D1464
Operation
To operate the wireless microphone system:
01)
Complete the installation of the receiver. See 4.2.1. Mounting on page 12 and 4.2.2. Installation of
the Antennas on page 12.
02)
Complete the setup of the transmitter(s). See 4.3. Transmitter Setup on page 13.
03)
Complete the pairing of the receiver and the transmitter(s). See 4.4. Pairing on page 14.
04)
Connect the receiver to a mixer or an amplifier. See 4.5. Connecting the Receiver to Mixer/Amplifier
on page 15.
05)
Connect the receiver to power supply. See 4.2.3. Connecting to Power Supply on page 12.
06)
Switch on the receiver. See 5.1. Receiver Switching ON/OFF on page 16.
07)
Switch on the connected mixer/amplifier.
08)
Turn up completely the volume of the receiver with the volume controls (01)/(07).
09)
Switch on the transmitter. See 5.2. Transmitter Switching ON/OFF on page 16.
10)
Talk or sing into the microphone. The AF indicator bar on the LCD display (04) of the receiver lights
up. The AF indicator bar increases or decreases during talking/singing.
11)
Slowly turn up the volume on the connected mixer/amplifier to the desired level.
After use, switch off the receiver and the transmitter(s). See 5.1. Receiver Switching ON/OFF and 5.2.
Transmitter Switching ON/OFF on page 16 for more information.
Muting the Transmitter
During operation you can mute the transmitter with the ON/OFF button (19).
●
Press the ON/OFF button (19) to mute the transmitter. The mute LED indicator (18) lights up in red.
●
When the transmitter is muted, press the ON/OFF button (19) to unmute the transmitter. The mute LED
indicator (18) lights up in green.
Transmitter Mute LED Indicator Statuses
The mute LED indicator (18) on the transmitter has the following statuses:
●
Green:
normal operation
●
Red:
the transmitter is muted
●
Flashing red:
battery low
Receiver Display Indications
The LCD display (04) on the receiver shows the following information for channel A (CH A) and channel B
(CH B):
Fig. 11
A) Selected channel – for more information see 5.6. Channels Overview on page 18
B) AF indicator bar – shows the strength of the audio signal during operation
C) RF indicator bar – shows the strength of the radio signal during operation
D) Channel frequency – for more information see 5.6. Channels Overview on page 18
Содержание COM-42
Страница 12: ...11 COM 42 2Ch Handheld set Product code D1464 Dimensions Fig 05 Fig 06 Fig 07...
Страница 24: ...2023 DAP...