manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 430

Hardware

430

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.3.3.3. The FS3852 PCI board

This FireSpy is a PCI card. It must be build into a PC.

IDC connector
The IDC connector is an auxiliary port.The auxiliary port will be discussed in a separate chapter. See

Auxiliary connector ports

. . 

Circular LEMO connector (6x)
With these connectors the FireSpy 3852 can be connected to the IEEE1394 bus to be analyzed. Each
FireSpy node (A, B, C) exposes two of its PHY ports through one LEMO connector per port. The FireSpy
ports exposed are numbered top-down as follows: A0, A1, B0, B1, C0. C1. The exact connector model
used is LEMO EGG.0B.304.CLL. 

PCI connector
The PCI connector is the connection between this FireSpy and the computer it is to work with. Place the
connector into an empty PCI slot in the computer.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды