DAP Technology 1394, Руководство по эксплуатации

Страница: 359 / 458

Format Editor
359 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
It defines an SBP (SBP2) Set type for a Direct-access (SBC) device. The Set type and Set name and
sometimes the Set key are used by the Analyzer to find the correct format definitions. How these fields
need to be filled in depends on the protocol the format set is used for. For details on this, see the
corresponding document file (e.g. the '
Editing SBP2 formats' section for more details on these Set options
for the SBP2 protocol).
21.1.2. Input and Output parameters
Input parameters
Each definition can use input parameters to control the format. Each parameter you want to use needs to
be defined in the 'Parameters' tab in the 'Definitions' pane. When a parameter has been defined, you can
use it in any expression.
In the following image, the 'Parameters' page of a SBP2 format set is shown.
When one of the definitions of the format set is executed, zero or more of these parameters will be filled
in (for the others, the default value will be used).
For an example of the use of input parameters, see
Editing SBP2 Formats .
Output parameters
When a definition is executed, it can also generate output parameters. The 'command' definition shown
above for instance, will generate the 'operation_code' parameter. The value will be the value of the
corresponding field. For an example of the use of output parameters, see
Editing SBP2 Formats .
Checking Input and Output parameters
In the 'Result' pane you can define values for all input parameters by moving them to the 'Input
parameters' box. All generated Output parameters will be shown in the 'Output parameters' box.
The following images shows an example where a few input parameters are defined and where the
selected format definition results in some output parameters (note that in this example the input